Now loosen the bolts that hold the front wheel in place, and place the long bracket on
the axle and replace the bolts (See Fig. 6). Now tighten the bolts and your basket is
installed and ready for use.
the axle and replace the bolts (See Fig. 6). Now tighten the bolts and your basket is
installed and ready for use.
Wire Basket Assembly
Installing a wire basket to your brand new 2WheelBikes beach cruiser will take
approximately 5-10 minutes. Following the below instructions (using the pictures
as a guide) will ensure that you can properly and safely install your wire basket
All you will need for installation of the basket is a screwdriver, a 14mm wrench,
and an allen wrench (See Fig. 1).
approximately 5-10 minutes. Following the below instructions (using the pictures
as a guide) will ensure that you can properly and safely install your wire basket
All you will need for installation of the basket is a screwdriver, a 14mm wrench,
and an allen wrench (See Fig. 1).
Fig. 1
First, install the bracket to the basket using the screws and clamp provided. Be sure
make sure it is snug, but still allow some give to allow movement of the bracket
during installation. (See Fig. 2)
make sure it is snug, but still allow some give to allow movement of the bracket
during installation. (See Fig. 2)
Fig. 2
Next, install the black bracket onto the basket using the screws and bolts provided.
(See Fig. 3)
(See Fig. 3)
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Next, loosen the handle bar stem from the bike and place the black bracket around the
handle bar stem. (See Fig. 4) Now install the handle bar stem back onto the bike. (See
Fig. 5)
handle bar stem. (See Fig. 4) Now install the handle bar stem back onto the bike. (See
Fig. 5)
Full Range of Beach Cruisers, Mountain
Bikes, Children's Bikes, and Tandem Bikes
Bikes, Children's Bikes, and Tandem Bikes
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Nation's LargestAirsoft Gun Retailer |
